AJAS Cover
Frequency: Continuous
ISSN: 1546-9239 (Print)
ISSN: 1554-3641 (Online)
Research Article Open Access

Simulation and Optimization of Perovskite Type Micro Thermoelectric Generator

Jeyashree Yesuraj1, Vimala Juliet Ashokan2, Sukhi Yesuraj3 and Rebecca Shirly Harrison Christley2
  • 1 Department of EEE, SRM University, Chennai, India
  • 2 Department of EIE, SRM University, Chennai, India
  • 3 Department of EEE, RMK Engineering College, University, Chennai, India

Abstract

In this study the thermoelectric properties of perovskite type Ca-Mn-O3 compounds are estimated for the operating range of 850-1150 K. The optimization of design module for maximum power output is obtained using the analytical expression for power of Thermoelectric Generator (TEG). For the optimum length of 1.4 μm and with a cross sectional area of 0.3×0.3 μm the power obtained is 4.635 nW. For the same optimum length of 1.4 μm when the cross sectional area is increased to 0.6×0.6 μm the power obtained is 18.54 nW. A bridge type micro TEG (μTEG) with two thermo couples in series and four thermocouples in parallel are simulated and the temperature and voltage distribution obtained. The variation of power density for varying the gap length is analyzed. The calculated power density is 2.75 mW/(cm2K2) for optimum length of 1.4 μm with a gap length of 0.3 μm and cross sectional area of 0.6×0.6 μm. The calculated power density is increased to 4.0748 mW/(cm2K2) for the same optimum length of 1.4 μm when the gap length is 0.1 μm and with the same cross sectional area of 0.6×0.6 μm. To power up a 75W LED street light the required number of devices connected in series is 322 and in parallel is 12,658228 with the impedance matching between the micro thermoelectric generator and the load.

American Journal of Applied Sciences
Volume 13 No. 11, 2016, 1277-1289

DOI: https://doi.org/10.3844/ajassp.2016.1277.1289

Submitted On: 23 October 2015 Published On: 26 November 2016

How to Cite: Yesuraj, J., Ashokan, V. J., Yesuraj, S. & Christley, R. S. H. (2016). Simulation and Optimization of Perovskite Type Micro Thermoelectric Generator. American Journal of Applied Sciences, 13(11), 1277-1289. https://doi.org/10.3844/ajassp.2016.1277.1289

Open AccessCopyright: © 2016 Jeyashree Yesuraj, Vimala Juliet Ashokan, Sukhi Yesuraj and Rebecca Shirly Harrison Christley. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

  • 3,527 Views
  • 1,899 Downloads
  • 0 Citations

Download

Keywords

  • Micro Thermo Electric Generator
  • Figure of Merit
  • Design Optimization
  • LED Lighting